Winco DSE7300 Series User Manual
Page 2
DSE Model 7000 Series Control and Instrumentation System Operators Manual
2
Part No. 057-074 7000 Series OPERATING MANUAL ISSUE 5 15/10/2009 ADM
Deep Sea Electronics Plc
Highfield House
Hunmanby
North Yorkshire
YO14 0PH
ENGLAND
Sales Tel: +44 (0) 1723 890099
Sales Fax: +44 (0) 1723 893303
E-mail:
Website:
www.deepseaplc.com
DSE Model 7200 / 7300 series Control and Instrumentation System Operators Manual
© Deep Sea Electronics Plc
All rights reserved. No part of this publication may be reproduced in any material form (including photocopying or storing in any
medium by electronic means or other) without the written permission of the copyright holder except in accordance with the
provisions of the Copyright, Designs and Patents Act 1988.
Applications for the copyright holder’s written permission to reproduce any part of this publication should be addressed to Deep
Sea Electronics Plc at the address above.
The DSE logo and the names DSEUltra, DSEControl, DSEPower, DSEExtra, DSEMarine and DSENet are UK registered
trademarks of Deep Sea Electronics PLC.
Any reference to trademarked product names used within this publication is owned by their respective companies.
Deep Sea Electronics Plc reserves the right to change the contents of this document without prior notice.
Amendments since last publication
Amd. No.
Comments
1
Added Maintenance Alarm
2
Added manual fuel pump and manual speed control (Issue 2.1)
3
Added more detail to many sections of the manual (Issue 2.1) including CTs, Earth Fault, Overcurrent, RS232,
Modem, RS485, external sounder, expansion modules (DSE2100 series),
4
Added changes to Dual Mutual, Fuel usage, dummy load control, load shedding, protections disabled, 2500
series display (for version 4 module additions)
5
Additions for V5 modules including modem diagnostics and updated front panel editor details including
scheduler editing.
Clarification of notation used within this publication.
NOTE:
Highlights an essential element of a procedure to ensure correctness.
CAUTION!
Indicates a procedure or practice, which, if not strictly observed, could result in damage or
destruction of equipment.
WARNING!
Indicates a procedure or practice, which could result in injury to personnel or loss of life if not
followed correctly.