Winco Mfg. S300 - Stretchair - Manual (Page 10)

OPERATING INSTRUCTIONS
Assisting Patient Into Stretchair
1. Stretchair should be in upright position.
(FIG. 1)
2. Apply central locking wheel brakes (S675 & S999) or all 3 total lock casters (S300).
(FIG. 2a-2b)
3. Adjust armrests to the DOWN position. (SEE PAGE 13)
4. Pivot the footrests to upright position with the padded surface facing outward. (FIG. 1)
5. Assist patient into chair and secure them with the safety belt provided.
6. Pivot the footrests down and adjust them to a position that's comfortable for the patient.
(SEE PAGE 9)
7. Adjust armrest/side rail height to suit the patient. (SEE PAGE 13)
Moving Patient in Chair Position
1. If the vertical lift has been engaged return chair to it's lowest position and recline the Stretchair
slightly using the handset control. (FIG. 3)
2. Unlock the wheels and secure the wheels in the "steer lock" position. (FIG. 2A or 2B)
4. Secure the patient in the chair using the safety belt.
3. Push chair from behind using the back handle.
Converting Chair to Layflat Position
1. Lock wheels. (FIG. 2a-2b)
2. Adjust the armrests to their fully upright position.
3. Secure the patient's arms in front of their chest.
4. Raise the patient's legs and pivot the footrests to the up position. (FIG. 1)
5. Using the handset control place the chair in the layflat position. (FIG. 3 & 4)
DO NOT stand or sit on the footrest.
DO NOT place hands, legs or feet under seat, legrest
or footrest. Stay clear of all moving parts.
KEEP CHILDREN AWAY from the underside of chair.
Injury may occur.
FIG. 2B FIG. 2A
FIG. 1
10