Winco Mfg. S300 - Stretchair - Manual (Page 12)

OPERATING INSTRUCTIONS
SWING-LEG OPERATING INSTRUCTIONS
The swing-leg is designed to elevate one or both patient's legs to a comfortable or prescribed posi-
tion. Once the leg is elevated it will remain at a fixed angle, relative to a patient's thigh, regardless
of the chair angle.
Desired positioning of legs can be achieved with 4 length settings and infinite elevation adjustments.
In the layflat position, the swing legs are NOT adjustable.
Adjusting Swing-leg for Patient Comfort
1. The Stretchair MUST BE in the upright position.
2. Depress the swing-leg release handle and adjust to desired elevation. (FIG. 5)
• Footrests can be pivoted to "cushion up" position for added patient comfort or can be left in
"cushion down" position.
3. To adjust footrest to 1 of its 4 extended positions, push or pull on the footrest while pulling down
on the spring plunger. (FIG. 6)
4. Once the desired length is found release the spring plunger and push or pull the footrest to
ensure the footrest has locked into position.
5. Use the handset control to adjust the chair angle for additional patient comfort.
FIG. 5 FIG. 6
12