Winco Mfg. S300 - Stretchair - Manual (Page 16)

MAINTENANCE GUIDE
Linak Actuator Replacement
1. Place chair in the layflat position
(SEE PAGE 7) with the vertical lift in its highest
position. (FIG.20)
2. Unplug the Linak Actuator cord from the battery
control box. (FIG.21)
3. Locate the Linak Actuator positioned just behind
the Monarch Power Unit. (FIG.23)
4. Cut all nylon ties that secure the Linak Actuator's
power cord to the chair frame.
5. Remove the upper mounting bolt and spacers.
(FIG.22)
6. Remove the lower mounting bolt and spacers.
(FIG.22)
7. Carefully remove the old Linak Actuator
8. Position the new Actuator and install the LOWER
mounting bolt and spacers provided.
9. Plug-in the new Linak Actuator cord to the battery
control box. (FIG.21)
10. Using the handset control, press the layflat
positioning button to extend the actuator shaft to
match the upper mounting bracket holes.
11. Position and install the upper mounting bolt and
spacers. (FIG.22 )
12. Secure the Linak Actuator power cord to the chair
frame with the nylon ties provided.
FIG. 20
FIG. 21
FIG. 22 FIG. 23
16