XMART Optima-RACK 10K - Manual (Page 28)

USER MANUAL - OPTIMA UPS 6K/ 10K (ENGLISH)
______________________________________________________________________________________________________________________
20140805 Tower-Rack 6K-10K ISOTX - 28
UPS FRONT PANEL: LCD
This UPS has a sophisticated LCD able to display all important information related to input line, UPS status and values,
operation mode and error and alarm messages. It is a powerful information tool to know what is happening at any moment.
LCD is also the configuration interface for all configurable parameters.
1.- BATTERY INFORMATION: In this section is displayed battery charging level and battery alarms/error icons.
2.- ELAPSED TIMER: When UPS switches to battery mode, elapsed time during battery mode is displayed in
Hours/Minutes/Seconds.
3.- ERROR / ALARM CODE: In case of alarm or error, 2 digits code is displayed in this section to describe the kind of error or
alarm. Revise error and alarm codes tables in this manual.
4.- BEEP STATUS: It shows if audible alarm buzzer is active or muted.
5.- LOAD INFORMATION: In this section is displayed load value connected to UPS by 4 segments displays:
(0-25%), (25%-50%), (50%-75%) and (75%-100%). It also shows error and alarm icons related to UPS output.
6.- UPS MODE: All possible UPS modes are indicated by this section in graphic way.
7.- INPUT / OUTPUT VALUES: Input and output voltage and frequency values can be monitored in this LCD section. In battery
mode this section shows battery DC voltage.