Lane change assist, Flash-to-pass – Ram Trucks 2015 Chassis Cab Commercial - Owner Manual User Manual

Page 163

Advertising
background image

NOTE:

If either light remains on and does not flash, or

there is a very fast flash rate, check for a defective outside

light bulb. If an indicator fails to light when the lever is

moved, it would suggest that the indicator bulb is

defective.

Lane Change Assist

Tap the lever up or down once, without moving beyond

the detent, and the turn signal (right or left) will flash

three times then automatically turn off.

Flash-To-Pass

You can signal another vehicle with your headlights by

partially pulling the multifunction lever toward the steer-

ing wheel. This will cause the high beam headlights to

turn on until the lever is released.

Turn Signal Lever

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161

Advertising