Onboard diagnostic system (obd ii), Loose fuel filler cap message – Ram Trucks 2015 Chassis Cab Commercial - Owner Manual User Manual

Page 491

Advertising
background image

ONBOARD DIAGNOSTIC SYSTEM (OBD II)

Your vehicle is equipped with a sophisticated onboard

diagnostic system called OBD II. This system monitors

the performance of the emissions, engine, and automatic

transmission control systems. When these systems are

operating properly, your vehicle will provide excellent

performance and fuel economy, as well as engine emis-

sions well within current government regulations.
If any of these systems require service, the OBD II system

will turn on the “Malfunction Indicator Light (MIL).” It

will also store diagnostic codes and other information to

assist your service technician in making repairs. Al-

though your vehicle will usually be drivable and not

need towing, see your authorized dealer for service as

soon as possible.

CAUTION!

Prolonged driving with the MIL on could cause

further damage to the emission control system. It
could also affect fuel economy and driveability.
The vehicle must be serviced before any emissions
tests can be performed.

If the MIL is flashing, while the engine is running,

severe catalytic converter damage and power loss
will soon occur. Immediate service is required.

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines

that the fuel filler cap is loose, improperly

installed, or damaged, a loose gascap indicator

will display in the EVIC/DID telltale display

area. Refer to “Electronic Vehicle Information Center

7

MAINTAINING YOUR VEHICLE 489

Advertising