Oil life reset – Ram Trucks 2015 Chassis Cab Commercial - Owner Manual User Manual

Page 244

Advertising
background image

as there is a stored message, an “i” will be displayed in

the DID’s compass/outside temp line. Examples of this

message type are “Right Front Turn Signal Lamp Out”

and “Low Tire Pressure.”
Unstored Messages
This message type is displayed indefinitely or until the

condition that activated the message is cleared. Examples

of this message type are “Turn Signal On” (if a turn signal

is left on) and “Lights On” (if driver leaves the vehicle).
Unstored Messages Until RUN
These messages deal primarily with the Remote Start

feature. This message type is displayed until the ignition

is in the RUN state. Examples of this message type are

“Remote Start Aborted - Door Ajar” and “Press Brake

Pedal and Push Button to Start.”

Five Second Unstored Messages
When the appropriate conditions occur, this type of mes-

sage takes control of the main display area for five seconds

and then returns to the previous screen. An example of this

message type is “Automatic High Beams On.”

Oil Life Reset

Your vehicle is equipped with an engine oil change

indicator system. The “Oil Change Required” message

will flash in the DID display for approximately 10

seconds after a single chime has sounded, to indicate the

next scheduled oil change interval. The engine oil change

indicator system is duty cycle based, which means the

engine oil change interval may fluctuate, dependent

upon your personal driving style.
NOTE:

Use the steering wheel DID controls for the

following procedure(s).

242 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising