Ram Trucks 2015 Chassis Cab Commercial - Owner Manual User Manual

Page 293

Advertising
background image

6. Modes

The airflow distribution mode can be adjusted so air

comes from the instrument panel outlets, floor outlets,

and demist outlets. The Mode settings are as follows:

Panel Mode

Air comes from the outlets in the instrument

panel. Each of these outlets can be individu-

ally adjusted to direct the flow of air. The air

vanes of the center outlets and outboard outlets can

be moved up and down or side to side to regulate

airflow direction. There is a shut off wheel located

below the air vanes to shut off or adjust the amount

of airflow from these outlets.
Bi-Level Mode

Air comes from the instrument panel outlets

and floor outlets. A slight amount of air is

directed through the defrost and side window

demister outlets.

NOTE:

BI-LEVEL mode is designed under comfort con-

ditions to provide cooler air out of the panel outlets and

warmer air from the floor outlets.

Floor Mode

Air comes from the floor outlets. A slight

amount of air is directed through the defrost

and side window demister outlets.

Mix Mode

Air comes from the floor, defrost and side

window demister outlets. This mode works

best in cold or snowy conditions.

NOTE:

The air conditioning compressor operates in MIX

and DEFROST modes even if the A/C button is not

pressed. This dehumidifies the air to help dry the wind-

shield. To improve fuel economy, utilize these modes

only when required.

4

UNDERSTANDING YOUR INSTRUMENT PANEL 291

Advertising