Ram Trucks 2015 Chassis Cab Commercial - Owner Manual - Manual (Page 220)

• Five Second Unstored Messages
When the appropriate conditions occur, this type of
message takes control of the main display area for five
seconds and then returns to the previous screen. An
example of this message type is “Automatic High Beams
On.”
Oil Life Reset
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
will display for approximately 10 seconds after a single
chime has sounded, to indicate the next scheduled oil
change interval. The engine oil change indicator system
is duty cycle based, which means the engine oil change
interval may fluctuate, dependent upon your personal
driving style.
NOTE:
Use the steering wheel controls for the following
procedure(s)
Vehicles Equipped With Passive Entry
1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine).
2. Push and release the DOWN arrow button to scroll
downward through the main menu to “ Vehicle Info”.
3. Push and release the RIGHT arrow button to access
the “ Oil Life” screen.
4. Push and hold the RIGHT arrow button for one
second to access the “ Oil Life Reset” screen.
5. Push and release the DOWN arrow button to select “
Yes ”, then push and release the RIGHT arrow button
to select reset of the Oil Life.
6. Push and release the Up arrow button to exit the EVIC
screen.
218 UNDERSTANDING YOUR INSTRUMENT PANEL