Shifting out of neutral (n) – Ram Trucks 2015 Chassis Cab Commercial - Owner Manual User Manual

Page 458

Advertising
background image

NOTE:

With electronic shift transfer case:

• Steps 2 through 5 are requirements that must be met

before pressing the NEUTRAL (N) button, and must

continue to be met until the shift has been completed.

If any of these requirements are not met before press-

ing the NEUTRAL (N) button or are no longer met

during the shift, the NEUTRAL (N) indicator light will

flash continuously until all requirements are met or

until the NEUTRAL (N) button is released.

• The ignition switch must be in the ON/RUN position

for a shift to take place and for the position indicator

lights to be operable. If the ignition switch is not in the

ON/RUN position, the shift will not take place and no

position indicator lights will be on or flashing.

• A flashing NEUTRAL (N) position indicator light

indicates that shift requirements have not been met.

Shifting Out Of NEUTRAL (N)
Use the following procedure to prepare your vehicle for

normal usage.
1. Bring the vehicle to a complete stop, leaving it con-

nected to the tow vehicle.

2. Firmly apply the parking brake.
3. Turn the ignition switch to the ON/RUN position, but

do not start the engine.

4. Press and hold the brake pedal.
5. Shift the transmission into NEUTRAL.

• With manual shift transfer case, shift the transfer

case lever to the desired position.

456 STARTING AND OPERATING

Advertising