Ram Trucks 2015 Chassis Cab Commercial - Owner Manual - Manual (Page 221)

Vehicles Not Equipped With Passive Entry
1. Without pushing the brake pedal, cycle the ignition to
the ON/RUN position (do not start the engine).
2. Push and release the DOWN arrow button to scroll
downward through the main menu to “ Vehicle Info”.
3. Push and release the RIGHT arrow button to access
the “ Oil Life” screen.
4. Push and hold the RIGHT arrow button for one
second to access the “ Oil Life Reset” screen.
5. Push and release the DOWN arrow button to select “
Yes ”, then push and release the RIGHT arrow button
to select reset of the Oil Life.
6. Push and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
EVIC Messages
• Front Seatbelts Unbuckled
• Driver Seatbelt Unbuckled
• Passenger Seatbelt Unbuckled
• Service Airbag System
• Traction Control Off
• Washer Fluid Low
• Oil Pressure Low
• Oil Change Due
• Fuel Low
• Service Antilock Brake System
• Service Electronic Throttle Control
• Service Power Steering
4
UNDERSTANDING YOUR INSTRUMENT PANEL 219