Soeiin – Sears 17891 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
mmmm
tmí
soeiin
1. Full out retractaba spool pin and place
thread spool on the pin. To wind bobbin,
draw thread from spool through bc^bin
winder tension disc as indicated, and pull
end of thread toward bobbin winder.
2. Wind thread around bobbin several times
in direction of arrow; place bobbin on
bobbin winder shaft.
3. Push bobbin winder latch against bobbin
until it dickt. Then pull Hand Wheel
away from machine to disengage dutch
(see diagram belowl. Start machine by
pressing down on foot control.
4. When bobbin is fuN, winding stops
iutomatioaily. Push in Hand Wheel.
Remove bobbin from shaft and trim
thread end.
Treat hand wheel as a ''dutch"
it controls the needle drive mechanism so
that when pulled out (disengaged), the
machine will not operate while the bobbin
Is being wound.