Fi|ckiii<s up bubbin thriad – Sears 17891 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fi|CKIii<S UP BUBBIN THRiAD
1. Raiis»
ptmm
foot lever. Hold needle
thrtid loosely In left hand and rotite
handwheel toward you one complete
turn. (Fig.l)
2. Bring bobbin thread up by
thread. (Fig. 21
upper
3. I^ull both threads under end to the back
of the preuer foot, leaving 3 to 4 inches
of thraad clear. (Fig. 3)
If you can not pick up bottom thread by
following above steps, then check;
1. Is needle threaded ?
2. Is thread tangled around needle ?
3. Is bobbin case threaded correctly w4th
thread going through slots A and B as*
shown on page 11, Fig. 4 and 57
4. Is diere 4 inches of thread coming from
bobbin cast and through slot of needia
plate as shown on i&age 11, Fig. 57
5. Is thread from bobbin ease tangled 7
13