Threading thi ioiiln – Sears 17891 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING THi iOiilN
0
1. Rais« naadla to its highest position by
rotating hand wheel toward you.
2. Remove bobbin cover plate by lifting up
the front.
3. Insert bctisbin into bobbin case malting
sure bobbin routes counter clockwise.
4* Rull thread through slot {Al and then to
the left.
5. Pull thread through slot IB) toward the
rear of machine and leave about 4 Inches
of thread.
6. Replace bobbin cover plate allowing
thread to emerge through slot in rreedle
plate.
11
Advertising