Caring for the machine, Cuaninq and dlllmû .. aaia, Replacind bottdin case – Sears 17891 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
.
CARING FOR THE MACHINE
To Iniurt tht b«tt poutbli opiritlon of your
machine, It It nsoaiMry to keep the eiientlil
parti clean at all timet.
1. Remove bobbin coyer plate.
2. Remove neodle plate.’
3. Uting the bruih provided, remove the lint
that accumulatet in and around the feed
dogtandihuttlearei.
Reed
dogi
Sobbln
Cite
CUANINQ AND dlLlMÛ
.. AAiA
19
m
id
Id
On occaeioni, you will need to clean the
shuttle area. Juet follow theie ilmpla atepi.
1. Turn hand wheel toward you until needle
ii above feed dogi.
2. Remove bobbin eaae by lifting It out from
front.
3. Clean the shuttle with the brush and put a
drop of oil to the points Indicated by
arrows. Don't over-oll, (Reminder: don't
use household oll...Kenmore sewing
machine oil,)
NOTE: Kenmore Oii/Oiler No.
BSm
ii avsil-
■ ble
St
most Sears retail stores end
catalog.
REPLACIND BOttDIN CASE
1. Make lure needle is above feed doga.
Inaert bobbin case into shuttle until its
groove life on shuttle recewey ei
illustrited, and then snap down into
position.
2. Replace both needle plate and bobbin
cover plate to their originai poiitlone,
Shuttle
raceway
Groove
51