Sears 17891 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THNiAttifye
rop
tHRiAD
Pig, 2
1. Plalse thriad take<up Itvar to iut Ntihait
position by turning hand wheel toward you.
Raise dresser foot lever.
Place thread' spool on spool pin. Place
appropriate spool cap over the spool. See
Fig. 1.
Holding thread taut with right hand, drew
thread through rear thread guides IA and B)
artd into threading channel (C) toward you.
IFlg. II
2. Draw thread down channel (Cl and up
channel (0). Thread take*up lever (E) by
guiding thread through the slot
and
lead
thread down through channel (Dl again.
Pass thread through lower thread guide (F)
and needle bar thread guide (dl and thread
needle from front to back, (Fig. 2 and 31
12
Fig. 3
THREADIN0 DOUELi NEEDLE *
Place second spool of thread on second spool
pin, and thread machine as you would for a
single needle except double thread guides are
provided it (FI and idl in Fig. 2 and 3. Draw one
thread through each of these and through each
side of needle from front to back. Make certain
threads are not crossed.
«Available at most Sears retail stores and
catalog.