Changing needle – SINGER W1805 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Proper needle
straight shaft
sharp point
cG
/ %
/
X
Changing Needle
Set
needle
in
the
highest
position
by
turning
handwheel
towards you.
Loosen needle clamp screw and
take out needle.
With
flat
side
away
from
you,
insert a new needle into groove
of needle bar.
Push needle into clamp until it
reaches stopper (a) and tighten
needle clamp screw firmly.
Always use a straight needle with
a sharp point.
Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping
of thread: it also can damage
hook and needle plate.
Advertising