SINGER W1805 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Push bobbin to right and press
down foot controller.
Machine
stops
automatically
when bobbin is full.
Push bobbin to left, to disengage
from wheel.
Take
off
bobbin
from
spindle
and cut thread.
Retighten stop motion knob.
If
bobbin
is
wound
unevenly
as shown, open face cover and
loosen set-screw of the guide for
bobbin winding: Use screw driver
to adjust height.
trouble
correction
-
11
-
Advertising