Drawing up lower thread, Foot pressure – SINGER W1805 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Drawing Up Lower Thread

Hold end of upper thread with

left hand.

Turn handwheel slowly towards

you until needle moves down and

up again.

Pull upper thread slowly and
lower thread will be brought up

in a loop.

Pull out both threads to about 15
cm (6”) and place them together

under presser foot on left.

Foot Pressure

Push down the outer ring of the pressure
regulator. This will release the pressure on
the presser foot. To increase the pressure,

push down inner pin until suitable pressure

is obtained.

Insufficient pressure may cause poor
feeding of the fabric, skipped stitches, or
difficulty in guiding the fabric. If feed dogs

or presser foot marks appear on the fabric,

reduce the pressure.

When sewing multiple thickness or heavy
fabric,

reduce

the

pressure.

Increase

pressure

when

sewing

lighter

weight

fabrics.

Advertising