Mending a rip – SINGER W1805 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
11. MENDING
Patching
(For model 1510 and 2640
only.)
Set machine as shown.
Place the patch over the worn
part.
Sew along the edge of the patch
on the right side. Trim away the
worn part close to the seam on
back side.
Mending a Rip
(For model 1510 and 2640
only.)
Set machine in the same way
as for patching.
Sew the edges of tear together
first.
Then sew two more seams on
either side.
A piece of gauze can be placed
underneath to reinforce the rip.
Advertising