Cloth guide, Adjusting thread tension, Cloth guido – SINGER W1805 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cloth Guide
* Option accessory.
Use cloth guide when sewing a
long
seam
of
regular
distance
from edge of material.
Set guide in hole on arm, at right
of
needle
plate,
and
adjust
distance.
Run machine with edge of fabric
touching guide.
Position cloth guide at an angle
to sew a curved seam.
Sew
reverse
stitches
for
rein
forcement at end of seam.
Draw fabric to left when sewing
is finished.
Cut
threads
with
thread
cutter
behind presser bar.
Adjusting Thread Tension
Test
stitch
performance
on
a
scrap of material you are going
to use.
With correct tension ((a ), upper
and
lower
threads
tension
is
equal and strong enough to lock
both threads in center.
If upper tension is too tight
(loose), upper (lower) thread lies
straight
along
upper
(lower)
surface of fabric (©.©)• Correct
by turning tension dial.