Starting to sew, Tz •= rr,rcvrir/;lr,rii.:^;:;ri, Turning a square corner – SINGER W1805 User Manual
Page 22: Turning a square corner.................' ' 1 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. STARTING TO SEW
needles more easily than fabrics made of natural fibers,
of the first 3 or 4 stitches of the seam.
Tz •= rr,rcvrir/;Lr,rii.:^;:;ri“
for desired seam edge.
5. Run the machine at a slow even speed. The more pressure you put on the foot contrc
the faster the machine will sew.
6. Fasten each seam by back tacking at the beginning and end of the seam.
7. Always finish sewing each seam with the needle at its highest point.
3
Guide the fabric gently with your hand in front of the needle. Never pull or hold th
' fabric in such a way that the normal feeding is altered.
9. When turning the hand wheel manually, always turn it toward you.
Turning A Square Corner
To turn a square corner 5/8
from
the
fabric
edge,
stop
stitching with the needle tip
piercing the fabric, when reaching
the cornering guide as shown.
Raise the presser foot, turn
fabric. New stitching line will
align with 5 / 8 " seam guide on
side of needle plate. Lower the
presser foot and begin stitching
in new direction.
-
17
-