Roll hemming – SINGER W1805 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
19. ROLL HEMMING
Set machine as shown.
* Option accessory.
With straight stitch
Make 0.3cm(1/8") double fold
for about 5cm(2") at very edge
of material, and crease it.
Sew twice at 0.6cm(1/4") from
edge-
.
Draw out work and leave about
15cm(6") of thread.
Place material under presser foot
and guide edge into scroll, pulling
six thread ends towards back.
Sew a few stitches as shown.
Keep guiding material holding
raw edge about 0.6cm(1/4'') m
front of foot.
Advertising