Needle threading – SINGER WSL1634 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
NEEDLE THREADING
5. Turn the handwheel toward you until
needles are fully raised.
6
. Pass the right and left needle threads as
illustrated.
Important: The thread must lie correctly
between the two discs inside the tension
dials.
Pass through the needle eyes from front to
back as illustrated.
7. Pull out the thread end about 10 cm (4")
long from the needle eyes. Raise the
presserfoot and place threads under it,
then lower the presser foot.
Advertising