Trial sewing – SINGER WSL1634 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the overlook has been threaded for the
first time or re-threaded because of thread
breakage during sewing, start sewing in the
Holding the end of threads between your left
finger tips, turn the handwheel slowly toward
you two or three times and check the thread
Place fabric for trial sewing under the presser
foot and start sewing slowly.
The fabric will be automatically fed.
Guide the fabric as you serge.
When work is finished, continue sewing to
form about 5 cm (2") long thread chain from
the end of fabric.
Cut the threads with a scissor.