SINGER 95-100 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

12

To Prepare for Sewing

Vlth the left hand hold the end of the needle thread, leaving

It: slack: fГОШ the hand to the needle^ turn the balance wheel over

Fig.16. Drawing Up the Bobbin Thread

toward you until the needle moves down and up again to its highest

point, thus catching the bobbin thread; draw up the needle thread

and the bobbin thread will come up with it through the hole in the

throat plate (see Fig.16). Lay both threads back under the pres-

ser foot.

To Commence Sewing

Place the material beneath the presser foot, lower the presser

foot and commence to sew, turning the balance wheel over toward

you.

■ .

To Remove the Work

Let the thread take-up lever rest at its highest point, raise

the presser foot, draw the work back and cut the threads close to
the goods.

Advertising
This manual is related to the following products: