Use only singer* oils and lubricants, Other singer lubricants – SINGER 95-100 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USE ONLY SINGER* OILS
and LUBRICANTS
They insure freedom from lubricating trouble and give
longer life to sewing equipment
The following are
the
correct lubricants for this machine:
TYPE B
—
MANUFACTURING
MACHINE OIL, HEAVY
GRADE
When a
stainless oil
is
desired,
use:
TYPE D
— MANUFACTURING MACHINE OIL, STAIN
LESS, HEAVY GRADE
OTHER
S I N G E R
LUBRICANTS
TYPE E
- STAINLESS THREAD LUBRICANT
For lubricating the needle thread of sewing machines for
stitching fabrics or leather where a stainless thread lubri«
cant Is required,
TYPE F ^ MOTOR OIL
For oil lubricated motors and plain bearings in power
tables and transmitters.
NOTEs All of the above oils are available in 1 qyort^
I gallon and
5
gallon cam or m
55
gallon drums,
SEAR LUBRICANT
This specially prepared grease is recommended for gear
lubrication on manufacturing sewing machines,
BALL BEAR1N6 LUBRICANT
This pure grease is specially designed for the lubrication
of ball bearings and ball thrust bearings of motors and
electric transmitters, ball bearing hangers of power tables^
©tc Fwnished in 1 lb, and 4 lb.
CopyrighI, U. S. A„ 1914, 1915, 1922, 1926, 1933, 1935, 1936 and 1937,
by The Singer Manufacturing Company
Ail Rights Reserved for oil Countries
^ Reg. U. S. Pot. Off.