Ihe bobbin thread – SINGER 6104 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ihe bobbin thread!
Your sewitig machine uses two threads to form a stitch. The upper thread comes from the
spool and is thipaded through the
of the needle. The lower thread comes from the hob-
bin. Wind fee bobbin before threading fee machine.
WINDING THE BOS&IN
1. Raise the presser foot and turn hand wheel
until needie is in highest po
Loosen hand wheel knob A by
With the right hand
3. Open slide plate and lift out bobbin.
4. Place spool pin felt on pin.
• Place thread spool on spool pin with thread
retaining slit B on top. (Break paper at the
end of spool if necessary}. If you are using
a tube of thread affix spool pin extension
to spooi pin to ensure even flow of thread.
Lead thread around bobbin winder tension
disc C and through smaii hole in bobbin
from inside out.
• Place bobbin on spindle and push bobbin
to right to engage bobbin winder.
Hold thread end as shown and start the ma
chine. Cut off thread end after a few coils
have been wound.
When required amount of thread has been
wound (winding will stop when bobbin is
fuil}> stop fee machine and cut connecting
Push bobbin to left and remove bobbin from
Hold hand wheel and tighten hand wheel