Settikg needle position, Setting stitch width – SINGER 6104 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
in addition to straight stitch and zig-zag stitch, your machine can produce two types of stitich
patterns: Straight Stretch stitch and Ric-Rac stitch.
Setting selectors
SETTIKG NEEDLE POSITION
Before moving needle position selector, make
sure needle is above fabric.
AJi stitch patterns can be sewn in either left
L , centre X , or right J, needle position
Selector setting centre X is used most often.
SETTING STITCH WIDTH
Before moving stitch width selector, always
raise needle above fabric.
•
•
To produce the Straight Stretch stitch the
stitch width selector must be positioned un
der the «> symbol.
itt
• To produce the Ric-Rac stitch the stitch width
selector must be moved from its straight
po
sition
toward the
right
to any
setting
bet
ween I and .
The further you move the selector fever to
the right, the wider your stitch will be.