SINGER 6104 - Manual (Page 30)

ADJUSTING STITCH LENGTH
When you are preparing to do stretch stitch**
ing, make a test sample with the fabric and
thread you plan to use
For stretch stitch patterns, stitch length is
controlled
With
a single setting of the stitch
length selector. Simply rotate it until the co­
loured bar i is under the ▼ symbol above
the dial
ADJUSTING STITCH BALANCE
When you are using stretch stitch patterns,
you may need to adjust the stitch balance dial
in order to correct the appearance of the
stitch.
Before you move the dial from its neutral
po­
sition
{
<
symbol on dial aligned with line
on panel), make a test sample. If adjust­
ment is required stitch slowly and move the
dial as illustrated.
♦ Turn dial
down to bring stitches of the pat­
terns together (ilL A}.
♦ Turn dial up to separate stitches of the
pat­
terns
(ill. B).
Always return the dial to its neutral position
after sewing stretch stitch patterns.
28