Machine set-up, Material, Procedure – SINGER 9910-WORKBOOK Quantum User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Patchwork/Fagoting Stitch can be used to join two pieces of fabric
together. This is a delicate finish that allows a small opening between the
two pieces of fabrics. It is often seen on heirloom garments.
stabilizer
Machine Set-up:
Machine Set-up for Step One (Joining Stabilizer to Fabric)
Stitch:
#1, Straight Stitch
Stitch Width:
3.5, Center Needle Position
Stitch Length:
5.0
Presser Foot:
Standard Foot
Machine Set-up for Step Two (Fagoting)
Stitch:
#15, Fagoting Stitch
Stitch Width:
6.0
Stitch Length:
2.6
Presser Foot:
Standard Foot
Material:
(2) 4”
X
4” Linen-like fabric
Water soluble stabilizer
Procedure:
♦Fold 4” pieces in half and press.
♦ Lay stabilizer under one piece of fabric, extending away from the folded
edge by 1”.
♦ Using machine set-up for Step One, baste stabilizer /4” away from folded
edge.
♦ Repeat step with other edge, leaving approximately V
a
gap between the
two folded edges.
♦Set machine for Step Two (Fagoting).
♦Center open area with stabilizer under the foot.
♦Stitch down the stabilizer, slightly catching the edges of the folds.
♦ Remove basting stitches and stabilizer.
29