Flttaebing ribbon with a twin noodlo, Machine set-up, Materials – SINGER 9910-WORKBOOK Quantum User Manual
Page 57: Procedure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
flttaebing Ribbon
with a Twin Noodlo
By using a Twin Needle, two parallel rows of stitches can be used to
attach a ribbon while stitching.
_
#1, Straight Stitch
3.5, Center Needle Position
3.5
Satin Foot or Standard Foot
Twin Needle*
Twin ju
Machine Set-Up:
Stitch:
Stitch Width:
Stitch Length:
Presser Foot:
Needle:
Needle Setting:
Materials:
5” X 5” piece of lightweight woven fabric, with a stabilizer applied
6” piece of %” wide satin ribbon
Procedure:
♦ Insert the second spool pin.
♦ Both spools of thread follow the same threading path until they reach
the eye of the needle. Thread each needle separately.
♦Insert the ribbon through the opening in the presser foot, pull the ribbon
under the foot and then to the back of the foot.
♦Slowly proceed to sew a row of stitching on the right side of the fabric,
maintaining a slow consistent speed to ensure quality stitching.
Note: Do not use the Automatic Needle
Threader with the Twin Needle.
Twin needle is an optional accessory.
oj
46