Machine set-up, Materials, Procedure – SINGER 9910-WORKBOOK Quantum User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Blanket Stitch is a bold finish on fabric edges, especially fleece. This
is ideal for finishing off the edges of blankets or jackets.
#20, Blanket Stitch
7.0
2.6
Standard Foot
Machine Set-Up:
Stitch:
Stitch Width:
Stitch Length:
Presser Foot:
Materials:
3” X 5” polar fleece
Heavy decorative thread in needle and bobbin (for example topstitching
thread or heavy weight cotton)
Water soluble stabilizer
Size 16 or 18 needle
Procedure:
♦ Position fabric with raw edge on left.
♦ Place stabilizer under polar fleece.
♦ Extend stabilizer 1” beyond the fleece edge.
♦Stitch so that the forward motion stitches enter the stabilizer just barely
off the raw edge of the fleece, and the needle swing enters the fleece.
32