Machine set-up, Materials, Procedure – SINGER 9910-WORKBOOK Quantum User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Pin Stitch is a delicate stitch commonly used for heirloom projects.
It is ideal for joining lace pieces together or for appliqueing.
#19, Pin Stitch
2.0
2.6
Standard Foot
Machine Set-Up:
Stitch:
Stitch Width:
Stitch Length:
Presser Foot:
Materials:
2”
X
3” simple cotton appliqué
2”
X
3” fusible webbing
5” X 5” cotton fabric
5” X 5” tear-away stabilizer
Procedure:
♦Fuse a simple-shaped appliqué to the fusible webbing.
♦Fuse the appliqué onto a cotton-type fabric (base fabric).
Fusing the appliqué into place will eliminate the appliqué from shifting
while stitching.
♦Place a tear-away stabilizer underneath the base fabric. This is used to
ensure quality stitching when using dense stitches.
♦ Place the applique under the foot, so that the swing of the stitch
will form on the applique and straight part of the stitch falls on the base
fabric.
♦Sew around the applique.
51