Adjusting stitch iength, Needle thread tension, Ajuste longitud de puntada – SINGER 7011 User Manual

Page 42: Tensión hilo de la aguja, Adjusting stitch length needle thread tension

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjusting stitch iength

Any stitch length setting from 1 to 5 will give
you an open zig-zag stitch.

The higher the number, the more open, or
further apart your stitches will be.

The area between 0 and 1 on the dial is used
for satin stitching, a series of closely spaced

plain zig-zag stitches that form a smooth
satin-like surface.

Needle thread tension

The needle-thread tension dial regulates the
amount of tension on the needle thread and

lets you select just the right setting for your

fabric and thread.

The correct tension setting will produce a

smooth even stitch (1).

Too much tension will produce a tight stitch
(2), causing fabric to pucker. Loosen tension
by turning dial to a lower number.

Too little tension will produce a loose stitch
(3), causing loops in your pattern. Tighten

tension by turning dial to a higher number.

Ajuste longitud de

puntada

Cualquiera de las posiciones de longitud del

punto desde 1 a 5 le producirán un zig-zag
abierto.

Cuanto más alto sea el número, más abiertas o

más separadas serán las puntadas.

El área entre 0 y 1 en el dial, se utilizan par^ los
puntos de realce o satin, una serie de puntos

de zig-zag planos bastante juntos que forman

una superficie suave como de satin.

Tensión hilo de la aguja

El dial de tensión del hilo de la aguja, regula la
cantidad de tensión de éste y permite
seleccionar la posición exacta para su tejido e
hilo.

Los puntos en zig-zag requieren, normalmente,
menos tensión que los puntos rectos.

Una tensión apropiada produce un punto
suave y uniforme (1).

Demasiada tensión producirá un punto más
prieto (2), causando arrugas en el tejido.

Afloje la tensión girando el dial hacia un

número inferior.

Poca tensión producirá un punto flojo (3),
causando lazos en su diseño.

Apriete la tensión girando el dial hacia un

número superior.

40

Advertising
This manual is related to the following products: