Zig-zag stitch, Seam finishing, Satin stitching – SINGER 7011 User Manual

Page 44: Punto zig-zag, Acabado de ribetes, Punto de realce

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Zig-zag stitch

The Zig-Zag Stitch can be used when sewing

seams, appliqueing, monogramming or for

decorative sewing.

Recommended settings
Stitch Selection: Zig-zag Stitch

Needle Position:

Stitch Width: 1---wWWWWVy^

Stitch Length:

Foot:
Needle Plate:

2-5

Special Purpose (J)
General Purpose (A)

Seam finishing

Use a zig-zag stitch to finish seam edges

of fabrics that are likely to fray.
• Sew seams as desired; trim and press

open.

• Place edge of seam allowance under foot,

as shown,

• Stitch close to edge, letting outer zig-zag

fall over edge of fabric.

Satin stitching

Recommended settings

Stitch Selection: Zig-zag Stitch

Needle Position:

Stitch Width: [---vvWWWVyyy^

Stitch Length:

Foot:
Needle Plate:

0-2

Special Purpose (J)
General Purpose (A)

Satin stitching is a series of closely spaced
zig-zag stitches. Satin stitch can be used for

monograms, embroidery and applique work

to produce a smooth satin-like finish.

• Practice to get desired stitch appearance.

Block monogramming

• Lightly trace letters on right side of fabric.
• Centre tracing under needle.
• Stitch entire outline, leaving needle in

fabric when turning.

• Pull threads to wrong side of fabric, tie and

trim.

Punto zig-zag

El punto de zig-zag se utiliza para coser
ribetes, apliques, monogramas o realizar
puntos decorativos.

Posiciones recomendadas
Selección punto: Zig-Zag

Posición aguja:

Anchura punto: [--^wWWWVyyy^

Longitud punto:
Prénsatelas:
Plancha aguja:

2-5

Uso especial (J)
Uso general (A)

Acabado de ribetes

Utilice el punto zig-zag para rematar bordes

o ribetes de tejidos que son propios a
deshilarse.
e Cosa los ribetes como precise; recórtelos

y planche.

e Coloque el borde del ribete debajo del

prénsateles, como se muestra.

• Cosa junto al borde, dejando que la parte

externa del zig-zag caiga sobre el borde.

Punto de realce

Posiciones recomendadas
Selección punto: Zig-Zag

Posición aguja:

Anchura punto: [ "-^NAA/WVWWyiM

Longitud punto:
Prénsatelas:
Plancha aguja:

j

0-2

Uso especial (J)
Uso general (A)

El punto de realce es una serie de puntadas

en zig-zag bastante juntas. Se utiliza para

monogramas, bordado y apliques, produ­
ciendo un acabado suave como de satin.
• Practique, para conseguir la apariencia

deseada del punto.

Monograma en bloque

• Marque las letras ligeramente en el

anverso del tejido.

• Centre las marcas debajo de la aguja.
• Cosa todo el contorno, dejando la aguja

en el tejido ai girar.

• Lieve ios hilos haciá la parte posterior del

tejido, anúdelos y córtelos.

42

Advertising
This manual is related to the following products: