SINGER W1600 - Manual (Page 10)

■;S
lEEDLE THREADING
5. Turn the handwheel toward you until needles
are fully raised.
6. Pass the right and left needle threads as
illustrated.
Important: The thread must lie correctly
between the two discs inside the tension dials.
Pass through the needle eyes from front to back
as illustrated.
7. Pull out the thread end about 10 cm(4") long
from the needle eyes. Raise the presser foot
and place threads under it, then lower the pres­
ser foot.
Left needle thread Right needle thread
1
\ T\