Changing the thread (tying on), Luilt-in pocket handle – SINGER W1600 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
CHANGING THE THREAD (TYING ON)
it is simple to change the thread in the following manner.
Cut the thread above the spool pin, and knot ends of old and new threads
together.
Set the tension dials to "0"and raise the pressarfoot.
Pull the other end of thread until knots come un
der the presser foot. For needle threads, pull the
other ends of threads until knots come to needle
eyes and cut the threads at the both sides of the
knots. Then re-thread the needles.
lUILT-IN POCKET HANDLE
-■-I
-•.0
The Built in pocket handle is a convenient way to
carry your machine.
-
14
Advertising
This manual is related to the following products: