Looper threading, 7^ ^ v – SINGER W1600 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LOOPER THREADING
V®
7
^ ^ V
Correct threading is important otherwise uneven stitches or thread breakage may result
A convenient threading chart is placed on the front panel inside the front cover,
in addition, each thread guide is colored for threading
indication.
To help in threading, tweezers can be found in the
accessory box.
Threading must be carried out in the
following sequence.
I.FIRST................Upper looper
2.SECOND............... Lower looper
3. THIRD............. Right needle
4. F1NALLY............. Left needle
l.Open the front cover and free arm.
2. Turn the handwheel toward you until, the
looper
comes
to
best
position
for
threading.
3. Pass the upper looper thread and lower
looper thread as illustrated,
important; The thread must lie correctly
between the two discs inside the tension
dials.
4. Pull out the thread end about 10 cm
(4") long from the looper eyes. Raise the
presser foot and place threads under it,
then lower the presser foot.
Upper looper thread Lower looper thread
,0
o
a
'
0
grzdJ
a
__Q_____O 0
C2CiJ */<
n D D
J D 0
3
4
i f
-
8
-