Setting up your machine, Setting up your machine ~8 – SINGER W1600 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING UP YOUR
MACHINE____________
Set your Overlook machine on a sturdy flat
surface.
[THE POSITION OF THREAD POLE]
Pull up thread pole to its highest point before
threading.
Turn the thread pole so the thread guides come
right above the spool pins.
[CONE HOLDERS]
Both industrial cones and domestic type thread
spools can be used on this machine.
For large diameter industrial cones use the cone
holders with the large end at the top. For small
diameter cones, use the same cone holders with
the small end at the top.
Normal
[SPOOL CAPS]
When using domestic type thread spools, remove
the spool holders and place spool caps over,the
thread spools.
-a