Cutting width – SINGER W1600 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUTTING WIDTH
i he proper cutting width differs with the type of fabric. Check the seams each time, and adjust the
cutting width as follows.
¡.Turn the handwheel toward you until the needles are at the lowest position.
2.0pen the front coyer and free arm.
3.Turn the cutting width adjustment knob until the looper threads lie along the edge of the fabric.
Adjust to a narrower cutting width if the fabric edges curl when sewing. Turn the cutting width
adjustment knob to the right.
Adjust to a wider cutting width if the thread loops off the edge of the fabric.Turn the cutting width
adjustment knob to the left.
[THE PROPER CUTTING WIDTH]
Needle plate
[ADJUST TO A WIDER CUTTING WIDTH] [ADJUST TO A NARROWER CUTTING WIDTH]