Connecting the foot control, Controlling sewlng speed, Safety switch – SINGER W1600 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[CONNECTING THE FOOT CONTROL]
Push foot control plug into the machine socket and then into main socket.
Turn on the power switch. This power switch controls both the machine power and sewing light.
^ This appliance has a polarized plug (one blade widerthan the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way, if the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
[CONTROLLING SEWlNG SPEED]
The foot control regulates the sewing speed.
The sewing speed can be adjusted by
increasing or decreasing the pressure on
the foot control.
This machine is equipped with a micro
The machine is automatically cut off from
the electricity supply if either the free arm
or front cover is open.
Close both free arm and front cover before
you start sewing.