SINGER 14U32A Ultralock User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Whenever sewing difficulty is encoutered, make the adjustments as noted below.
Condition
Reason
Method of Adjustments
(reference pages)
When the fabric is not fed.
» Insufficient presser foot pressure.
® Increase presser foot pressure
(page 15).
When the needle breaks.
® Needle not inserted properly.
® Insert needle correctly or replace
with correct needle (page 14).
* Fabric being pulled too hard.
® Do not pull the fabric by hand.
Use hand only to guide the fabric.
® Loose needle set screw.
® Tighten screw firmly.
When the thread breaks.
® Incorrect threading.
® Thread machine correctly
(page 5).
® Bent needle or needle point
damaged.
® Change to correct needle
(page 14).
® Thread tension too tight.
® Adjust tension (page 9).
® Thread tangled.
® Thread correctly (page 5).
® Needle inserted incorrectly.
® Insert needle correctly (page 14).
When stitches skip.
® Needle bent or needle point
damaged.
® Replace with correct needle
(page 14).
® Needle set loosely.
® Set needle firmly in position
(page 14).
® Incorrect threading.
® Thread machine correctly
(page 5).
® Wrong needle used.
® Use Singer Cat. 2054 #14.
® Insufficient presser foot
pressure.
® Increase presser foot pressure
(page 15).
When stitches are
irregular.
® Thread tension not balanced.
® Adjust tensions (page 9).
When fabric puckers
® Thread tension too tight.
® Adjust tension (page 9).
® Threading incorrect or tangled.
® Thread correctly (page 5).
When the machine does
® Power line plug not connected.
® Connect with power source.
not operate.
® Motor damaged.
® Change carbon brush.*
® Controller damaged.
® Have your Singer representative
repair and service the controller.
When motor is excessively
noisy or when sparking is
excessive.
® Motor damaged.
® Change carbon brush.*
* Have your Singer representative
replace the carbon brush.
16