SINGER 14U32A Ultralock User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(2) Thread left looper in sequence from @ to 0 (marked in yellow color). Cylinder cover must also be
removed when threading this part. (Refer to page 4 for cylinder cover removal).
Tension discs
Turn machine pulley toward you
until left looper is at left as far
as it will go and thread looper
thread hole (£) from left to
right. (Use tweezers provided in
your accessory set).
©
5cm
(2 inches)
—L
Turn machine pulley toward you
until the looper is at right as far
as it will go passing the thread
under the throat plate, then
using a tweezer, thread the
looper thread hole ©from front
to back. Draw about 5cm (2
inches) of thread from thread
hole.