SINGER 14U32A Ultralock User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Correct sewing cannot be obtained when machine is threaded incorrectly.
Threading is diagrammed on the inner side of the looper cover and identified with colors on the various
thread guides.
(1) Open looper cover. Thread the right looper in the order 0 to (8) as indicated in the figure below,
(threading points marked in orange)
9 How to thread your machine correctly
Tension'
discs
/
y
/
Threading Chart
01
Use tweezers provided in the accessory set when
threading looper thread hole 0
Draw about 5cm (2 inches) of thread from the
looper thread hole.
Advertising
This manual is related to the following products: