Important safety instructions, Adanger, A warning – SINGER 14T970C User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always

be followed, including the following: Read the instruction carefully before you

use the machine.

ADANGER

- To reduce the risk of electric shock:

* The appliance should never be left unattended when plugged in.

* Always unplug this appliance from the electric outlet immediately after using

and before cleaning.

* Always unplug this sewing machine from the electric outlet immediately

after using and before cleaning, removing covers, relamping, lubricating
or when making any other user servicing adjustments mentioned in the

instruction manual.

A WARNING

- To reduce the risk of burns, fire, electric shock or

injury to persons:

* Do not allow this appliance to be used as a toy. Close attention is necessary

when this appliance is used by or near children and infirm persons.

* Use this appliance only for its intended use as described in this manual. Use

only attachments recommended by the manufacturer as contained in this

manual.

* Never operate this appliance if it has a damaged cord or plug, if it is not

working properly, if it has been dropped or damaged, or dropped into water.

Return the appliance to the nearest authorized dealer or service center for

examination, repair, electrical or mechanical adjustment.

* Never operate the appliance with any air openings blocked. Keep

ventilation openings of the sewing machine and foot control free from the

accumulation of lint, dust, and loose cloth.

* Keep fingers away from all moving parts. Special care is required around

the sewing machine needle and cutter.

* Always use the proper stitch plate. The wrong plate can cause the needle

to break.

* Do not use bent needles.

* Do not pull or push fabric while stitching. It may deflect the needle causing

it to break.

* Switch the sewing machine off “ O “ when marking any adjustments in the

needle area, such as threading needle area, such as threading needle,

changing needle, threading looper, or changing presser foot and the like.

Advertising