SINGER 14T970C User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

While holding thread with fingers, pass it between the
tension discs and pull thread down to make certain It Is

properly located in between the tension discs 3.

Turn the hand wheel toward you until the chain stitch

looper extends out 10mm from the throat plate edge.

Thread the looper area of the machine following the
yellow color-coded thread guides 4~10.

Note: Use the tweezers provided in the accessory case

to aid In threading the looper.

Place the thread with the point of the tweezers through

threading guide 4.

Place the thread with the point of the tweezers through

the front slot of threading guide 5.

Place the thread with the point of the tweezers through

threading guide 6,7 and 8.

Thread the looper eye (A) from front to back.

Pull about 10cm (4 inches) of thread through the
looper. Position thread into V cutout (B) on threader.

Firmly hold thread tall with left hand and pull threader

lever (C) up into place (D).

Sk

C

33

B

Advertising