Howto open looper cover, Principal parts behind the looper cover, Preparation prior to sewing – SINGER 14T970C User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. HOWTO OPEN LOOPER COVER
A
Caution:
Be sure to turn off power switch.
Push the cover to the right as far as it wiii go.
Puii cover down toward you.
A
Caution:
|\ Be sure iooper cover is ciosed when
sewing.
5. PRINCIPAL PARTS BEHIND THE
LOOPER COVER
1. Chain/Cover Looper
6. PREPARATION PRIOR TO SEWING
' Connect the controlier/eiectric piug to the
machine receptacle.
’ Plug power line into eiectric outlet.
' Power Switch: Push "i" mark side to turn “ON”
Push "O" mark side to turn “OFF”
' To run the machine and controi the speed, press
the controlier.
' The harder you press, the faster the machine
wiii sew.
' To stop the machine from sewing, remove your
foot from the controiier.
WARNING:
Use only foot controller provided with this machine.
(Type 4C-316B for U.S.A. & CANADA only)
Be sure to make reference to “Warning” on following
Page.