SINGER 14T970C - Manual (Page 51)

How to Exchange Light Bulb
A
Danger:
Always unplug before re-lamping.
Light bulb is available at your dealer shop.
Take old bulb to the dealer shop and ask for
same bulb.
If voltage Indicated on the electrical rating
plate of your machine is 120V, ask for light
bulb conforming to following specification.
- Bayonet type: 110~120V, 15W
• Glass shape: T-20
• Lamp cap:
El2
• Overall length: 48mm
• Remove light cover screw and while pushing
the cover lightly to the rear, swing cover to
the left and remove from machine as shown
in the illustration. Turn bulb to the left to
remove. To replace the bulb, push bulb Into
the socket and turn to the right.
A
A
Caution:
Be sure the light bulb has cooled off before
changing with a new one.
Warning:
Replace the light cover first before connecting
the power line plug.
If voltage Indicated on the electrical rating
plate of your machine is 220-240V, ask
for light bulb conforming to following
specification.
Edison type (screw type): 220-240V, 15W
• Glass shape: T-22
• Lamp cap:
El4
• Overall length: 56mm
Remove light cover screw and while pushing
the cover lightly to the rear, swing cover to
the left and remove from machine as shown
in the illustration. Turn bulb to the left to
remove. To replace the bulb, screw bulb Into
the socket and turn to the right.
50